^

WL-2425-IDU WL-2425-IDU Radio Antenna Connector Antenna Connector Alternative views Package Contents

v


<<

>>

Click the image to enlarge

WL-2425-IDU

34dBm 2.4GHz indoor signal booster

  • Ideal for use with Leaky Feeder Cable
  • Powered using a 12V 2Amp DC power supply (included)
  • SMA socket - radio side
  • Reverse SMA socket - antenna side

Buy Now

WL-2425-IDU

 


Overview

In instances where you are using very long antenna cables or 'leaky coaxial cable' then using an RF booster can be used to overcome any signal losses. The 2425-IDU can boost outgoing power up to 17dB (up to a limit of 34dBm maximum) and also add up to 12dB receive signal gain. The 2425-IDU is an indoor product and powered using a 12V 2Amp DC power supply. Connectors are standard SMA socket female (radio side) and RP SMA socket male (antenna side).

Please note that the user MUST take pains to ensure that their net EIRP does not exceed the regularity limits for the country where used i.e. 20dBm for the UK/EU.

Typical applications are anywhere where you are having to use overly long antenna cables or with leaky feeder coaxial cable (LCX typically has a coupling loss of about -70dB so you often need a much higher RF power and improved receive signal gain).


Specifications

Download specification datasheet
Operating range 2400~2500MHz
Channel width 20Mhz & 40Mhz
Supported standards IEEE 802.11b/g/n
Operation mode Bi-directional, half-duplex, time division duplex
Connector type To radio SMA female
To antenna Reverse SMA
Output power 2500mW (34dBm)
Input power 0~20dBm
Transmit gain 14-17dB
Receiver gain ≤12dB
Noise figure ≤3.5dB typical
Frequency response ±1dB over operating range
Power adapter 12V/2A DC, 100~240V
Operating temperature -20°C to +70°C
Operating humidity Up to 75% relative humidity
Material Cast aluminum
LED light Power status LED and activity status LED
Weight 94g
Dimensions 8.6 x 5.1 x 1.8cm

Downloads

Reviews

Brochures

Videos & Articles

Accessories


<

>

X