^

EL-ENSTATION5 Just 19cm diametre EL-ENSTATION5 EL-ENSTATION5 Rear ViewPackage Contents EL-ENSTATION5 Simplified AP Monitoring & Management using the EZ Controller - free download

v


<<

>>

Click the image to enlarge

EL-ENSTATION5

EnGenius High Powered, Long Distance 5GHz Wireless N300 Outdoor Access Point/Client Bridge

  • Up to 300 Mbps on 5 GHz Band
  • 19 dBi Dual Polarisation Directional High-Gain Antenna with Narrow Beam
  • IEEE 802.11a/n Compliant
  • 24V Proprietary PoE Support
  • Multiple Operation Modes Supported: Access Point, Client Bridge, or WDS Bridge
  • Dynamic Channel Optimization
  • Just 19cm in Diametre
  • IP55-Rated Waterproof Housing
  • Simplified AP Monitoring & Management using EZ Controller - free download

 

Authorised Distributor

»

Buy Now

EL-ENSTATION5

Mfr part code: ENSTATION5


Overview

The EnStation5 is a 5 GHz High-Powered, Long-Distance Wireless N300 Outdoor AP/Client Bridge with a high-gain 19 dBi dual-polarization internal directional antenna ideal for Point-to-Point deployments up to 4 miles. It includes two (2) Fast Ethernet ports and is housed in an IP55-rated waterproof housing to maintain robust performance even in harsh environments. Its dedicated 5 GHz frequency band avoids access points and client devices on the more congested 2.4 GHz frequency making it a smart solution for streaming video data for IP Cameras monitoring parking lots and it includes an additional Fast Ethernet Port (LAN 2) to connect a camera for this type of application.

Going The Distance. EnGenius EnStations are Outdoor Wireless Access Points that feature high 26 dBm output power and high receive sensitivity coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver robust and stable connectivity over extremely long distances — up to 4 miles in clear line-of-sight point-to-point deployments! EnStations, therefore, are ideal for:

• extending networks in large campus venues;
• over extensive acreage in industrial, farming or ranching properties;
• in massive indoor structures like arenas, shopping malls, warehouses, convention centers;
• connecting to digital signage;
• or even in more urban environments where there is clear line-of-sight between the EnStation and another Access Point; or between two EnStation units of the same frequency band.

WISP Scenarios. EnStations can be used in Client Bridge mode and pointed to a Wireless Internet Service Provider’s base station making them ideal CPE (Customer Premise Equipment) that can generate recurring revenue for Internet providers. The compact form factor of EnStation also make it acceptable to many homeowners association because they are barely noticeable and unobtrusive additions to home exteriors and usually within the guidelines of a planned community’s architectural standards.

Longer connectivity distances can be achieved when two EnStation units of the same frequency band are paired together in a Point-to-Point (PtP) deployment, and aligning their respective dish-shaped antennas to be directly facing each other so each gets the full impact of the more focused narrow wireless single beam.

EnStation5 supports three (3) operation modes — Access Point, Client Bridge, and WDS Bridge mode. This flexibility makes EnStation5 a versatile solution for IT managers who may need to update or reconfigure their deployments as the needs of their network change.

Each EnStation includes a proprietary PoE injector (EPE-1212) to supply power for the unit while at the same time providing a data connection over the same Ethernet cable. This is especially useful for deployments where a power outlet for the AP/Client Bridge may be scarce or unavailable, for example under the eaves of roofs, or high on light poles.

EnStations are easy to install in virtually any location and their internal electronics have been mounted in an IP55-rated enclosure, one of the highest waterproof and dustproof ratings available, designed to withstand extremely harsh environmental conditions including severe and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity. These protective measures make EnStations ideal outdoor wireless solutions for virtually any locale or any venue including ski and beach resorts, or desert resort communities.

EnStation5 also employs advanced QoS (Quality of Service) to prioritize bandwidth-intensive applications like video streaming or bandwidth sensitive applications like VoIP (Voice over IP) telephone calls for optimal connectivity.

EZ Controller
Simplified AP Monitoring and Management

For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux.

EZ Controller Screen

Free Download - click here

 

Specifications

Download specification datasheet

EnStation Solution datasheet

Hardware RF: 5 GHz Frequency Band
Standard: IEEE 802.11a/n
Radio I: 11a/n: 5.180-5.825 GHz
Data Rate: Up to 300 Mbps in 5 GHz band
Memory: 128MB
Flash Memory: 16MB
Transmit Power: 
Up to 26 dBm
Up to 400 mW
Radio Chains/Spatial Streams – 3x3:3
Supported Radio Technologies:
802.11a/n: Orthological Frequency-Division Multiplexing (OFDM)
802.11n with 5/10/20/40 MHz Channel Width
802.11a with 5/10/20 MHz Channel Width
802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
Supported Data Rates (Mbps):
802.11a: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 (MCS0 to MCS15)
Physical Interface Two (2) 10/100 BASE-T Ethernet Ports
One (1) Port supports 24V Proprietary PoE Input
One (1) Port supports extension of an Internet signal
Reset Button
LED Signal
Power
LAN 1
LAN 2
WLAN
Antenna One (1) Internal High-Gain Directional Antenna
19 dBi GHz Antenna
Azimuth Beam Width (Horizontal): 18°
Elevation Beam Width (Vertical): 30° 
Point-to-Point Transmission for Long Range Distances
5 GHz (Point 1)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 30° 
Elevation Beam-Width: 18°
VSWR: 1:2.0
5 GHz (Point 2)
Average Antenna Gain: 19 dBi
Polarization: Linear
Horizontal Beam Width: 18° 
Elevation Beam-Width: 30°
VSWR: 1:2.0
Power Requirements Power Source (PoE Injector):
24V/.6A Proprietary Compliant Source
Active Ethernet (Power over Ethernet, PoE)
Power Consumption: 7 W
Management
Auto Channel Selection Settings varies by Regulatory Domains
Operation Modes Access Point, Client Bridge, WDS Bridge
LAN IP (check validity and DHCP server IP range) MAC
SSID BSSID
Supports Four (4) SSIDs
VLAN Tagging Independent VLAN settings cab be enabled/disabled
Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID)
VLAN Pass-through
VLAN Pass-through over WDS Bridge
SNMP & MIB V1/v2c/v3 Support
MIB I/II and Private MIB
QoS Compliant with IEEE 802.11e Standard
Other Management Features Save Configurations as Default
Saves the customized configuration as the default value for different customer demands
Client Traffic Status
Reports various information in a timely manner as required by the administrator
Control Features RADIUS Accounting
Helps operators to offload 3G to Wi-Fi seamlessly
Settings vary by Regulatory Domains
Distance Control (Ack Timeout)
Multicast Supported
Wi-Fi Scheduler
Sets the Schedule for rebooting the device
Security WEP Encryption: 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering
Filter up to 50 MAC addresses
Wireless STA (Client) Connection List
Reports various information in a timely manner as required by the administrator 
802.1x Authenticator
Environmental & Mechanical
Temperature Range Operating: -4º~140ºF/-20ºC~60ºC
Storage: -22Fº~176ºF/-30ºC~80ºC
Waterproof IP55-Rated Enclosure
Certifications FCC, CE
Dimensions & Weights EnStation5 Device (Without Mounting Kit)
Weight: 460 g
Diametre: 19cm
Package Contents EnStation5 Outdoor CPE
PoE Injector (EPE-1212) with Power Adapter (24V/.6A)
Pole/Wall Mounting Kit
Mounting Screw Set & Rubber 'O' ring
Quick Installation Guide

Downloads

Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 27.10.16
'EnGenius WDS Bridging Setup Guide' - an explanation of WDS modes and a configuration guide Download here 13.07.15

EZ Controller
Simplified AP Monitoring & Management

For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux.

Free Download 27.04.15
Quick Installation Guide Download here 20.10.14
User Manual Download here 20.10.14

Reviews

Brochures

5GHz Outdoor Bridging Units Comparison Chart Download here 07.11.14
Free Surface Elevation Tool Download here 07.11.14
EnStation Solution datasheet Download here 07.11.14
Specification Datasheet Download here 07.11.14

Videos & Articles

Accessories


<

>

X