Click the image to enlarge
IP Com 900Mbps Dual-Band High Power Ceiling Mount Access Point
Aesthetic and discreet design that can be easily deployed on a ceiling or wall
- Dual band concurrent 450Mbps wireless data rate at both 2.4GHz and 5GHz
- 6 high quality antennas to boost the wireless signal for greater connectivity
- Can be centrally managed by an Access Controller CW500 & CW1000 available
- 400mw Independent Power amplifier provides great coverage
- Gigabit ports offer greater bandwidth capacity and faster data transfers
- Operates in multiple wireless modes that can expand an existing wireless network
- 2 year return to base warranty
- Claim your free Controller when you buy 60 or more of the W75AP*
The IP-W75AP is a dual-band indoor ceiling mount access point, ideal for hotels, office buildings, campus or other environments that need to extend and expand an existing wireless network.
Compliant with IEEE 802.11a/b/g/n the W75AP gives concurrent 450Mbps data rate on both 2.4GHz and 5GHz frequencies. The built-in 6 high quality antennas provide great coverage boosting the wireless signal for laptops, tablets and smartphones.
The discreet ceiling mount design allow you to mount the W75AP easily on ceilings or in crawlspaces.
A Power over Ethernet Injector is included.
* Claim your free controller: Add ALL the items to your shopping trolley, the promotion code below will issue a discount to the cost of the controller.
When you buy 60 IP-W75AP you can claim your free CW1000 Controller using promotion code IPCW1000 at the checkout
T&C's, You cannot mix and match AP's the 1 controller is free for every 60 of the same AP.
All AP's must be on the same order, you cannot claim for a controller after, for instance, 2 orders of 30 APs.
Offer available whilst controller stocks last.
Offer only available through the Solwise online checkout system.
|Download specification datasheet|
|AP Type||Fat AP|
|Antennas||2.4GHz 3 x 5dbi antennas
5GHz 3 x 5dbi antennas
|Power Method||PoE Injector|
|Maximum Power Consumption||26W|
|Maximum Transmit Power||2.4GHz 400mw(26dbm)
|LED indicator||SYS, 2.4G WiFi, 5G WiFi|
|Compliant Standards||IEEE 802.11n/g/b/a|
|Frequency Range||2.4GHz & 5GHz|
|Maximum wireless speed||2.4GHz 450Mbps
|Wireless Basic Settings||2.4GHz 8 SSID
5GHz 2 SSID
Enable/Disable Wireless Radio
Wireless Client isolation
Wireless Access Control
Wireless Client list
Adjustable transmit power
|Wireless Security Settings||64/128 WEP
|Working mode||AP,Bridge,Repeater,Universal Repeater|
|Maximum Concurrent Clients||2.4GHz 25 clients
5GHz 25 clients
|Receive sensitivity||a mode: -75dBm@8%
b mode：1M -95dBm@8% 11M -87dBm@8% PER；
g mode：54M -78dBm@8% PER；
n mode：72.2M -74dBm@8% PER； 150M -70dBm@8% PER
|LAN Settings||Static IP|
|Package Contents||Wireless N900 High Power Dual Band Access Point W75AP
1*Quick Installation Guide
5*plastic anchor bolt
|Operating Humidity||10%~90% non-condensing|
|Storage Humidity||10%~90% non-condensing|
|Default Settings||IP Address: 192.168.0.254
|Firmware to facilitate centralised management: this is for models sold prior to 15th March 2015
Files and instructions to update the W75AP ceiling mount access point from Ver 1 firmware to Ver 2 firmware. The W75AP on Ver 1 firmware DOESN'T support any form of centralised management. When updated to Ver 2 firmware the W75AP can be used as a traditional stand-alone access point OR as part of a managed access point configuration using the CW500 Controller (but the CW500 has to be on ver 2.x f/w - contact your supplier if you need CW500 f/w) or the new CW1000.
|Mounting Guide||Download here||27.08.14|
|Quick Information Guide||Download here||27.08.14|
|User Guide||Download here||27.08.14|