^

EL-EGS7228FP EL-EGS7228FP EL-EGS7228FP EL-EGS7228FP Provides Full-Featured Layer 2 Manageability Switch Comparison

v


<<

>>

Click the image to enlarge

EL-EGS7228FP

EnGenius 24-Port Gigabit PoE+ L2 Managed Switch & 4 Dual-Speed SFP

  • 24 Gigabit PoE+ Ports, IEEE802.3at/af support
  • 4 Available SFP Slots
  • Internal Power Supply with 370 PoE Budget*
  • PoE ports are 10/100/1000meg - 802.3af/at (30W per port up to the total PoE power of the switch)
  • Full Neutron Managed WiFi Integration
  • Full PoE power management
  • Full L2/Smart management
  • Link Aggregation
  • Bandwidth control
  • Access Control
  • Port and 802.1Q VLAN support
  • 19" Rackmount
  •  

Authorised Distributor

»

Buy Now

EL-EGS7228FP

 


Overview

The EnGenius Layer 2 switch includes IGMP Snooping, MLD Snooping, Port Mirroring, Rapid Spanning Tree, Multiple Spanning Tree, Spanning Tree, VLAN group, Voice VLAN, ACL, 802.1X port security, SNMP v1/v2c/v3 and IEEE802.3ad Link Aggregation Control Protocol (LACP). The EGS7228FP includes 24 Gigabit PoE (10/100/1000 Mbps) ports and four SFP (copper/hot-swappable small form-factor pluggable) Gigabit ports for optional fiber connectivity. IT managers or VARs who are expanding network deployments for businesses, schools, resorts and hotels, or other expansive venues can expect superior performance and reliability at a price point that is much more attractive than from larger, more enterprise focused network brands.

Rack Mountable
The EGS7228FP includes bracketing hardware for mounting onto a standard switch rack.

Ideal for Networks in Large Buildings or Linking Remote Buildings on a Campus
Includes 4 SFP Slots that accept fiber transceivers for extending the wired network beyond the limitation of Ethernet cabling with fiber cabling. Especially useful for schools with satellite classrooms, hotels and resorts, and other large multiple building properties.

 

Specifications

Download Specification Datasheet

Electron Solution Datasheet

Technical Specification
Standard Switching Capacity: 56Gbps
Forwarding Mode: Store and Forward
SDRAM: 128MB
Flash Memory: 16MB
Port Functions 24 10/100/1000Mbps Ports in the front panel
4 100/1000Mbps SFP Slot
1 RJ45 Console Port
PoE Capability PoE standard: Port 1~24 Support IEEE 802.3at/af
PoE Capable Ports: Port 1~24 can output up to 30W
Power budget: 370Watts
LED Indicator Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Copper Ports:
LAN/PoE Mode, Link/Act
SFP Ports:
Link/Act
L2 Features 802.1D Spanning Tree (STP)
802.1s Multiple Spanning Tree (MSTP)
802.1w Rapid Spanning Tree (RSTP)
MLD Snooping
IGMP Snooping v1/v2/v3
802.3ad Link Aggregation
Port Mirroring
Port Trunking
LLDP
MAC Address Table
Bandwidth Control
VLAN Features 802.1Q VLAN
Management VLAN ID
Port-based VLAN
Voice VLAN
CoS Features CoS based on DSCP
CoS based on 802.1p Priority
CoS based on Physical Port
PoE Management Power Class Configuration
Power Feeding with Priority
User Defined Power Limit
Security 802.1X Port Based Access Control/Guest VLAN
RADIUS Authentication
SSH / Telnet / Http(s)
Port Security
Storm Control (Broadcast/Multicast/Unknown unicast)
DoS Attack Prevention
BPDU Attack Prevention
MAC, IPv4, IPv6 ACL
Management User Management
Dual Image
Web-based Support
SNMP v1/v2c/v3
TFTP Upgrade
Command Line Interface (CLI)
SNTP
Web UI, Supports Non IE Browser (Chrome, Firefox, Safari)
RMONv1 (Supports 4 Groups)
SYSLOG
Cable Diagnostics
MIB Support (RFC1213, RFC1493, RFC1757, RFC2674)
Temperature Range Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing) 5% - 95%
*PoE switches and injectors can be used to power PoE compliant devices up to the total power output supported for the LAN port and the switch or injector as a whole.

Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.

Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.

Downloads

Firmware for this product should only be sourced via the Solwise or EnGenius Networks Europe B.V. websites. If it is sourced elsewhere it may damage your device and invalidate the warranty. We can't provide service support to devices which are not running with ETSI firmware. EnGenius Networks Europe B.V. Downloads Site 27.10.16
User Manual Download here 28.07.16
Quick Installation Guide Download here 28.07.16
CLI Manual Download here 28.07.16

Reviews

Brochures

EGS layer2 Switch Comparison Download here 28.07.16
Power over Ethernet Switches Comparison Chart Download here 07.11.14
Smart Switches Comparison Chart Download here 06.11.14

Videos & Articles

Accessories


<

>

X